Support for the steering column and also one behind the back on the drivers seat in place.
More work done.
New parts on the Camaro
More work, time to get the things around the rear axle done!
Repair / fabrication new sway bar.
Done!
Fabricating new 4-link bars and getting the Camaro new heim joints, always got parts like this in stock!
Done!
Parts from Good Vibrations Motorsports
Just got some stuff from Good Vibrations Motorsports, we always got some small stuff to the fuel system in stock contact me about what you need and if you want my help to get parts from them!
And also, I got parts in stock to make your new injector hat and port nozzle hoses, just let me know the length, and if you want to have straight or 90 deg hose ends.
Hose per foot and hose ends straight or 90 degrees.
JVA Camaro
Work pictures on the Camaro!
Old rear axle housing.
Gone!
New rear housing in place, must do some changes to the wishbone and new lower 4-link bars.
Also need to make new upper shock mounts.
Old vs new!
Lenco work for LL Racing
Sometimes things don’t work the way they supposed to…!
A couple of hours and the axle in the back housing is removed… The bearing was like welded to the axle, you learn new things all the time! 🙂
Parts from Toms Differentials
Got a couple of Toms 10″ ring and pinion sets today and some other stuff for Ford 9″, the best gear set you can buy for your 9″ third member! Let me know if you are interested in any parts from Toms!
Really nice piece!
Lenco transmission parts!
Got some Lenco parts today, I order parts from Lenco Racing pretty often and also got pretty much parts in stock for the CS1 trans, for example clutch discs, steel discs, o-ring gasket kits, seals, bearings, snap rings, reverse planetary, some tools, washers, front seal plug, well like you see the normal parts that’s needed for you trans!
And if you need help servicing your Lenco I can help you with that also, complete or just repair lose parts like change planetary gears etc.
Contact me and let me know what you need!
Electrimotion stuff!
Got som parts from Electrimotion today, contact me if you need anything from them!
Next car in the shop!
Johan Westbergs Camaro is in the shop!
Done with the Mustang!
The Mustang in now done and once again 7.5 sec certified! Time for next car!
Still some more tubing needed.
And done!